+86-18085038263
All Categories

UPVC Well Casing, Screen and Riser Pipes Delivered to the Philippines for 300 m Deep Wells

Nov.10.2026

Unloading of UPVC well casing pipes from a 40HQ container in Manila.jpg/

On 1 October 2026, a 40HQ container loaded at Qingdao on 25 August was opened in Manila and unloaded: 880 lengths — 2,640 metres — of ASTM F480 Schedule 80 UPVC well casing, slotted screen casing and high-pressure riser pipe. The customer is a Philippine distributor supplying water-well drilling projects, and the pipe was specified for wells down to 300 m. Fourteen days after unloading, the same customer placed a repeat order for the same products, with several more specifications added.

Shipment quick facts

Item

Detail

Destination

Manila, Philippines

Customer

Pipe distributor supplying water-well drilling projects in the Philippines

Application

Deep water wells, specified to 300 m depth

Products

UPVC well casing, UPVC slotted screen casing, UPVC high-pressure riser pipe

Standard

ASTM F480, Schedule 80

Length per piece

3 m, threaded joints

Quantity

880 pcs / 2,640 m

Container

1 × 40HQ, approx. 28 tonnes of pipe

Loading

Conveyor-belt loading; smaller diameters packed into the gaps between the large casing

Loaded

Qingdao, 25 August 2026

Arrived

Manila, 1 October 2026

Repeat order

15 October 2026 — same products, additional specifications

What the specification needed

This order was specified for deep-well work, with wells to 300 m. At that depth the pipe string does two different jobs, and both get harder than they do at 100 m.

The UPVC well casing — see the casing and screen range  — has to hold the borehole open against earth pressure and the water pressure outside the pipe, without collapsing or ovalising. The riser, also called the pump column, has to carry the pump’s discharge to the surface and hold the weight of the pipe string and pump from its top joint.

That is why the order went out in Schedule 80 walls rather than the lighter walls often used in shallow wells. The slot width on the screen casing is set per project from the grain-size distribution of the aquifer, and is confirmed with the customer at order stage.

What was in the container

Product

OD × wall

ID

Length

Qty

UPVC casing

273.1 × 17.5 mm (10 in)

238.1 mm

3 m

200 pcs

UPVC casing

219.2 × 14.5 mm (8 in)

190.2 mm

3 m

200 pcs

UPVC slotted screen casing

273.1 × 17.5 mm (10 in)

238.1 mm

3 m

60 pcs

UPVC slotted screen casing

219.2 × 14.5 mm (8 in)

190.2 mm

3 m

60 pcs

UPVC riser pipe

40 × 5.5 mm (1¼ in)

29.0 mm

3 m

120 pcs

UPVC riser pipe

48 × 5.5 mm (1½ in)

37.0 mm

3 m

120 pcs

UPVC riser pipe

60 × 6.4 mm (2 in)

47.2 mm

3 m

120 pcs

Total

 

 

 

880 pcs / 2,640 m

 

Three product families, one factory, one set of tolerances. That matters more than it sounds: casing, screen and riser are all produced and thread-gauged at the same plant, so the crew on site is not mixing pipe and thread tolerances from three suppliers.

upvc-casing-screen-pipe-workshop-bsx.jpg.jpeg/Blue UPVC well casing and slotted screen pipes racked in the BSX workshop before dispatch          upvc-casing-screen-pipe-workshop-bsx.jpg 2.jpeg

Why 300 m changes the specification

Three things matter more as a well gets deeper.

Wall thickness. Collapse resistance depends on the ratio of wall thickness to outside diameter, and it rises steeply as that ratio increases — roughly with the cube of it. Schedule 80 is the heavy-wall class in ASTM F480, which makes it the usual starting point when the string has to survive deep installation and long-term external pressure. The 10-inch casing in this order has a 17.5 mm wall and the 8-inch a 14.5 mm wall. Lighter classes are perfectly adequate in shallower wells.

Riser pressure rating and tension. A riser is sized from the pump, not from the hole depth. The net pressure it carries is the pump’s discharge pressure minus the water pressure outside the pipe, so it depends on the pump’s shut-off head, its setting depth and the water level in the well, plus friction loss and surge. Wall thickness therefore has to be chosen from a pressure rating, not from a price list. The 1¼-inch and 1½-inch risers in this order have a 5.5 mm wall; the 2-inch has 6.4 mm. A hanging riser also carries the weight of the whole string and the pump from its top joint, so on a deep setting the joint’s tensile strength is a design check as well.

Joint count. At 3 m per length, a 300 m string is 100 joints. Every joint is a potential leak and a few minutes of rig time, so thread quality and dimensional consistency decide how fast the well goes together. For deep wells that is one reason Schedule 80 is the usual choice over lighter classes; the trade-off is covered in Series 8 vs Schedule 80: which is better for deep-well construction .

Loading: conveyor belt, every gap used

Loading ran on 25 August with a conveyor belt feeding the container, the same method used on previous BSX shipments. About 28 tonnes of pipe went into the one 40HQ. Ten-inch and 8-inch casing were stacked in separate blocks, and the gaps left between the large diameters were filled with the smaller riser pipe rather than shipped as loose cartons.

upvc-casing-40hq-container-loading-qingdao.jpg.jpeg/10-inch and 8-inch UPVC casing stacked in a 40HQ container with riser pipe filling the gaps          upvc-casing-40hq-container-loading-qingdao.jpg 1.jpg

That packing decision is what kept the load tight, with no free space left at the doors. It also protects the pipe: a load that cannot shift sideways cannot rub a thread flat against a container wall.

From inquiry to repeat order: five dates

Date

Milestone

25 May 2026

Inquiry received from the customer

July 2026

Specification and order confirmed

25 August 2026

Container loaded at Qingdao

1 October 2026

Arrived Manila, unloaded

15 October 2026

Repeat order placed

 

Transit from loading to arrival in Manila took 37 days. From first inquiry to pipe unloaded in Manila took about four months, including production and ocean freight — the part buyers usually ask about. The repeat order followed 14 days after unloading, under five months from the first inquiry.

Inspection before the doors closed

Three checks ran before the container was sealed.

Wall thickness was measured with a dial gauge on each production batch, not just the first piece — the gauge reading is what tells you whether the extrusion line drifted during a long run. Threads were checked for form and start, since a 100-joint string multiplies any thread defect by a hundred. Piece counts were reconciled against the order line by line across all seven specification rows.

upvc-casing-wall-thickness-dial-gauge.jpg  2.jpeg/Dial gauge measuring the wall thickness of UPVC casing before shipmentupvc-casing-wall-thickness-dial-gauge.jpg.jpeg/Dial gauge measuring the wall thickness of UPVC casing before shipmentupvc-casing-wall-thickness-dial-gauge.jpg 3.jpeg

What the repeat order actually says

The customer unloaded on 1 October and ordered again on 15 October, buying the same products and adding several more specifications.

A distributor carries the risk of stock that does not sell or does not match the drawings, so a reorder is a commercial decision, not a courtesy. Two weeks is not enough time for a relationship to develop; it is enough time to open a few bundles, check the threads and walls, and decide whether the material is what was ordered.

For a first order of a new product line, that is the clearest reference we can offer: not a catalogue alone, but a second order that came with a wider range.

       Manila 40HQ UPVC Well Tubing Packing List.jpg

What this means for well projects in the Philippines

Philippine well programmes are often supplied through Manila and moved onward by road to the drilling site, so pipe length and load security matter as much as pressure class. Three-metre lengths travel on standard trucks without a low-bed trailer and can be handled by a small crew at the rig, which is why this order was supplied in 3 m lengths.

For a 300 m well the specification work is the same anywhere: match wall thickness to depth and formation, match slot width to grain size, and match riser pressure rating to pump head and setting depth. Get those three right and the pipe is unremarkable for the next few decades — which is the point.

FAQ

What was shipped in this container?

880 pieces of ASTM F480 Schedule 80 UPVC pipe in 3 m threaded lengths: 400 pcs of casing (10 in and 8 in), 120 pcs of slotted screen casing in the same two diameters, and 360 pcs of high-pressure riser pipe in 1¼ in, 1½ in and 2 in. Total 2,640 metres, about 28 tonnes, in one 40HQ container.

Can UPVC casing be used in a 300 m well?

Yes, when the wall thickness is chosen for the depth and the string is installed correctly. This order used Schedule 80 pipe: 17.5 mm wall on the 10-inch casing and 14.5 mm on the 8-inch, to ASTM F480. At depth the limiting factors are collapse resistance and joint integrity, not the material itself, so the planned installation — casing kept filled with water, centralised in the hole, gravel-packed or grouted as the design requires — should be checked against the pipe’s collapse rating before ordering.

Why 3 m lengths instead of 6 m?

Shorter lengths are easier to truck to a remote site, easier to handle at the rig without a crane, and easier to store on a small yard. The cost is more joints: a 300 m string at 3 m is 100 joints against 50 at 6 m, so thread quality has to be consistent. Buyers who have a crane and good road access sometimes prefer 6 m.

What is the difference between casing, screen and riser?

Casing is the solid-wall tube that holds the borehole open. Slotted screen casing is the same tube with machined slots, set opposite the aquifer so water enters while the formation is held back. The riser — also called the pump column — is the smaller high-pressure pipe that carries water from the pump up to the surface.

How do I choose the slot size for a sand and gravel formation?

Slot width is set by the grain-size distribution of the formation, not by preference. Too wide and the well pumps sand; too narrow and it throttles inflow and plugs. The method is set out in how to choose the right slot size .

How long does an order like this take?

About four months from inquiry to pipe unloaded in Manila: 13 weeks from inquiry to loading, then 37 days from loading to arrival. Production lead time depends on diameters and wall thicknesses; the schedule is confirmed at order stage.

Can this specification be repeated?

Yes. The seven specification lines in this order are held on file, which is why the repeat order — with additional sizes — could be placed two weeks after unloading without re-engineering the string. To repeat or adapt it, request the same specification .

Request a quotation

Send the well depth, borehole diameter, formation type, pump head and pump setting depth, and BSX will return a casing, screen and riser specification with pricing and lead time. Product data: PVC-U well casing and slotted screen pipe  and UPVC high-pressure submersible pump pipe . System design: drilling engineering solutions .

Related pages

Deep Well UPVC Pipeline FAQ

1

What is the difference between UPVC casing pipe and UPVC pump column pipe?

UPVC casing pipe is designed to support the borehole structure and prevent geological collapse, while UPVC high pressure pump column pipe is designed to withstand continuous water pressure and vertical pump loads during groundwater extraction.

2

Why use UPVC well pipes instead of steel pipes?

UPVC provides excellent corrosion resistance and maintains stable water quality because it does not rust or create mineral deposits. Compared with steel, UPVC reduces maintenance requirements and provides longer service life in groundwater environments.

3

How should engineers select UPVC well screen slot size?

Screen slot size should be selected according to aquifer particle distribution, groundwater conditions, and pumping requirements. Proper slot design improves water yield while preventing sand intrusion into pumps and pipelines.

Need a custom quote?

Send your project specifications — we’ll come back within 12 hours with pricing, lead time, certifications, and a technical data sheet.

upvc well casing screen and riser pipes delivered to the philippines for 300 m deep wells-0

Get a Free Quote

Our representative will contact you soon.
Email
Mobile/WhatsApp
Name
Company Name
Message
0/1000