HDPE Pipe in Coils or Straight Lengths: Which to Buy?
Updated November 2026.
Coil or straight length? Choose coils (also called rolls) for pipe up to 63 mm on long runs, and straight lengths for larger sizes. Coiled HDPE pipe cuts joints; straight lengths load tighter in a container. Browse our HDPE pipe range.
- Coils: fewer joints, faster laying.
- Straight lengths: higher loading, larger sizes.
HDPE Pipe Coil vs Straight Length
Table A. HDPE coils per 40 ft HC container (estimate)
|
Size |
Length per coil |
Assumed coil size (OD × width) |
Coils per 40 ft HC (est.) |
Total pipe length (est.) |
Cargo weight (est.) |
|
20–63 mm |
100 m |
1.8 m × 0.35 m |
36–42 |
3,600–4,200 m |
3.6–4.2 t (63 mm SDR 11) |
Estimate based on assumed coil dimensions, coils laid flat. Not BSX data. Volume, not weight, limits the load. Flanges not included.
Table B. Straight pipe loading by outside diameter (OD)
|
OD (mm) |
40 ft HC (L 12 m × W 2.3 m × H 2.69 m) |
20 ft GP (L 6 m × W 2.3 m) |
|
630 |
12 pcs |
– |
|
400 |
35 pcs / row, 7 layers |
30 pcs/ row |
|
355 |
42pcs/row; wall 18.1 mm |
– |
|
315 |
59pcs /row |
46 pcs/row |
|
280 |
75 pcs, 15 layers † |
– |
|
250 |
99 pcs/row; 85 pcs at 11 layers † |
9 pcs × 11 layers, 81 per row † |
|
225 |
122pcs / row (belled end) to 130 per row (plain end) |
105pcs |
|
219 |
124 pcs (wall 13.4 mm, belled end); 10 + 9 stagger, 13 layers high |
104pcs |
|
200 |
157 pcs/ row (wall 7.5 mm); 147 per row (wall 9 mm) |
136pcs (wall 7.5 mm); 126 (wall 9 mm), per row |
|
185 |
184–192 pcs/ row, 5 layers; 192 pcs without staggering † |
– |
|
180 |
192 pcs/ row |
156pcs |
|
165 |
208pcs /row (wall 7.5 mm) |
– |
|
160 |
243pcs/ row (up to 8 layers, belled end); 236 per row (10 layers, belled end) |
216 pcs(wall 6.2 mm) |
|
150 |
290 pcs (wall 5.5 mm, belled end, threaded); 15 + 14 stagger, 20 layers high |
– |
|
140 |
326 pcs/row |
297 pcs/ row |
|
125 |
410–420 pcs/row |
360–370 pcs/row |
|
114.3 |
518 pcs/ row (plain end, threaded) |
– |
Notes: Quantities are estimates for reference only; container sizes vary. Flanges are not included. A 40 ft container
can take pipe lengths of 2.95, 3.95 or 5.9 m; a 20 ft container 2.8 or 5.8 m. † The source chart is unclear for this entry.
Rule of thumb:
coils for long runs at 63mm or below; straight lengths for everything else. HDPE tolerates a bend radius of about 25 times its diameter, so coils follow uneven ground.
Both formats join by fusion, so no glue or threads. Compare methods in our butt fusion vs electrofusion guide.
- Coils: long runs at 63 mm or below, where fewer joints save fusion time.
- Straight lengths: sizes above 110 mm, fixed routes and mains.
1 km HDPE Pipe Example: Joints and Containers
For 50 m coils need 20 coils and 19 joints; one SDR 17 coil weighs about 100 kg (calculated). 11.8 m lengths need 85 pipes and 84 joints, about 12% of one 40HQ. See dredge pipe handling and shipping.
Coiled vs Straight HDPE Pipe FAQ
What is the maximum HDPE pipe coil size?
BSX coils go up to 63mm: 100 m per coil at 63 mm
Do HDPE pipe coils need fewer joints?
Yes. Over 1 km of 110 mm pipe, 50 m coils need 19 joints; 11.8 m lengths need 84.
How are large HDPE pipes shipped?
From 110 mm, straight lengths are nested to save freight.
Can coils and straight lengths be mixed?
Yes. Both are fused, so a coiled branch can join a straight main.
Send your length and diameter for a supply plan, or see solutions.